Starter Kit
$129
Wagly Core, Belt Base, USB-C cable and one tail of your choice.
- Five speeds and app control
- Choose Fox, Husky, Black Cat or Pastel Pup
- Early waitlist members get first allocation
Wag with feeling.
A quiet, app-controlled tail that clips to your belt and moves the way you do. Four styles, five speeds, a quarter-turn to swap.
Three parts. One quarter-turn.
Every Wagly is the same small system: a drive module that does the moving, a connector that locks a tail on, and the tail itself. Swap tails without tools; the Core remembers which one is attached.
-
Clip on the Core
The Wagly Core is a 62 × 38 × 30 mm pebble of matte charcoal that sits on the Belt Base. Inside: a quiet geared motor, a crank-rocker linkage for a natural swing, a 500 mAh cell and Bluetooth LE.
-
Twist on a tail
TailLock is a magnet-assisted bayonet: line it up, give it a quarter-turn, and it clicks home. Four spring contacts pass power and an ID, so the Core knows it is driving a fox and not a cat.
-
Set your rhythm
Press the Core's ember button to step through five speeds, or open the app for a fine slider, presets and battery level. No remote to lose: your phone is the remote.
Pick your tail.
Dense faux fur over a flexible spine that bends at the tip like the real thing. Every tail fits every Core.
Fox
Rust-red plume with a bright white tip. Our fullest tail, made for big, happy sweeps.
Try the wag.
This is the motion curve the Core runs: a ±35° swing from a lazy half-beat per second up to an excited three. Drag the slider or pick a preset.
The numbers we are building to.
These are design targets for the first production run, not measured results. We will publish lab figures for noise, runtime and water resistance once prototypes are tested.
| Wag motion | ±35° swing, 0.5–3.0 Hz |
|---|---|
| Control | 5 button speeds; app slider and presets |
| Noise | ≤ 35 dBA at 30 cm (target) |
| Battery | 500 mAh Li-Po, 2–4 h runtime (target) |
| Charging | USB-C, RGB status light |
| Connectivity | Bluetooth LE 5; iOS and Android app |
| Core size | 62 × 38 × 30 mm, ≤ 75 g (target) |
| Water resistance | IPX4 splash resistant (Core, target) |
| Connector | TailLock quarter-turn bayonet, 4 contacts |
| Tails | 300–450 mm, faux fur on flexible spine |
| Belt Base | Fits belts up to 50 mm wide |
Plug Base and Remote Play
This part of the page covers Wagly's adult accessories. It is product information only, with nothing explicit, but it is meant for adults.
Hidden. You can change your mind any time with the button above.
Plug Base
An alternative base for the same Core and the same tails. The body is platinum-cure, body-safe silicone in two sizes, S and M, with its own vibration motor powered through the TailLock contacts. Vibration can follow the wag speed or run on its own setting.
- Platinum-cure silicone, non-porous, easy to clean
- Sizes S and M; IPX7 target for the silicone body
- Vibration synced to the wag, or set independently
- Target price $59, arriving after the Belt Base
Remote Play
Hand the controls to someone you trust, from anywhere. Share a one-time link or code from the app; you set what they can change and for how long, and one tap ends the session.
- Share a link or code from the app.
- Set limits: maximum speed, intensity and session length.
- Stay in charge: the stop button on your screen and the button on the Core always win.
Remote Play Premium is planned at $4.99 per month. Creators can also charge for paid control sessions; Wagly keeps a 20% platform fee.
Pre-order pricing.
Target prices for the first run. Joining the waitlist costs nothing and holds your place; we will email before anything is charged.
Extra tail
$39
Any of the four launch styles. Twists onto the Core you already own.
Add a tailThe app
Free
Speed slider, presets, battery level and firmware updates for iOS and Android.
Try the wagQuestions.
Can I buy a Wagly today?
Not yet. Wagly is a concept product in development, and the images on this page are illustrative renders. Join the waitlist and we will tell you when pre-orders open; nothing is charged until then.
How loud is it?
Our target is 35 dBA or less at 30 cm, about the level of a quiet library. The Core uses a geared motor and a linkage instead of a buzzing direct drive, and the housing is damped. We will publish measured figures from prototype testing.
Do I need the app?
No. The button on the Core starts, stops and steps through five speeds. The app adds a fine speed slider, presets, battery level and firmware updates.
How long does a charge last?
The target is 2 to 4 hours of wagging per charge, depending on speed and tail length, from a 500 mAh cell. It charges over USB-C, and the status light shows when it is full.
How do I swap tails?
Turn the tail a quarter-turn counter-clockwise and lift it off; line up the next one and turn it clockwise until it clicks. Magnets help it seat. No tools.
Can I wash the tails?
Tails come off the Core, so the electronics never get wet. Spot-clean the faux fur with mild soap and cool water and let it air-dry. The Core is designed to IPX4, which means splash resistant, not waterproof.
Is it comfortable to wear all day?
The Core targets 75 g or less and the Belt Base spreads the load across your belt up to 50 mm wide. Tails range from 300 to 450 mm, so you can choose a shorter one for crowds.
What happens to my waitlist details?
We store your email and the options you choose so we can tell you about Wagly. We do not sell it or share it, and you can ask to be removed at any time by writing to maui@mfautomations.ai.
Get on the list.
Be first to hear when pre-orders open, and help us decide which tail ships first.
You are on the list.
Thanks. We will email you before pre-orders open. In the meantime, go give the wag slider a spin.